FIRSTCOM FC-R1 Repeater with Remote Control for Small Transceivers

Purchased several years ago.

I had planned to set it up for repeater operation, but I had trouble with the power supply connection and gave up, leaving it in the box.
Because double-sided tape was applied at that time, there are some remnants of the tape and slight dirt remaining.
There are also scratches on the bottom from the included hardware.

Overall, I subjectively consider it to be in good condition.

All channels have been tested and confirmed to be working for this listing.

There are two points that require explanation:
One is that there is a crack in the plastic cover (?) at the base of the antenna due to age-related deterioration. I believe it can be repaired with instant adhesive.
The other point is that the battery compartment of the remote control is tight (stiff?), possibly due to the casing design. It is somewhat difficult to insert and remove dry batteries. Currently, new batteries are installed, so there should be no problem for the time being.
Please understand these points.

Please feel free to contact us with any questions or requests.

Thank you for your consideration.




The following is quoted from the manufacturer's website:
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
Industry First! Easy Remote Control Operation
Infrared Control, Waterproof Repeater
Main Features
● Doubles the communication range for transceivers equipped with repeater compatibility.
● Complicated repeater settings can be done in one go with the infrared remote control.
(Utility Model Registration No. 3159053)
● Fully implements 27 channels for repeater communication.
● Group mode function reduces interference and allows communication only with your group (supports 38 groups).
● Features waterproof performance (IPX7 protection rating) to withstand wind and rain, allowing installation indoors or outdoors.