4 Pipe Stand - Cypress Wood - Wisteria Flower

Thank you for viewing our product.

[Product Description]
This is a pipe stand (kiseru stand) made with cypress wood as the base, treated with persimmon tannin as a primer, and finished with a water-based stain that complies with the Food Sanitation Act.

Persimmon tannin is a traditional coating with insect-repellent and anti-rot properties.
The persimmon tannin primer is applied thinly, so it's not a dramatic change. However, due to the nature of stain materials, which are easily affected by the color of the base, you can expect to feel a natural change as the color deepens slightly over the years due to the aging of the persimmon tannin.

The carving is a relief carving done by laser engraving.

Stable Use: The pipe is designed to fit securely and not rotate easily.

Versatile Use: Besides pipes, it's also useful for holding other cylindrical objects, calligraphy brushes, design cutters, pens, and other tools.

■ Product Specifications
Assembled Dimensions: Approx. W 9cm x D 10cm x H 12cm

Material: Cypress (5mm thick), Legs 1.5cm

Compatible Sizes: Length within 7cm-25cm / Suitable diameter within 1cm, maximum diameter up to 1.2cm can be used.

(※The pipe shown in the photo has a maximum total length of approximately 21cm. The pipe itself is not included.)

■ Before Purchasing (Please be sure to check)

Regarding Texture: Due to it being handmade and the nature of wood, there may be some roughness or unevenness in the finish on the surface.

Processing Characteristics: While we have removed some of the resin and charring, there may be slight discoloration or remaining char marks from the laser cutting process.

Durability: It is suitable for daily use, but as it is made of 5mm thick wood, please avoid applying strong pressure or impact, or using it in extremely humid places or under strong sunlight.

As natural wood is used, warping may occur due to bending.

Some adhesive is used.

■ Assembly Instructions
Assembly requires no tools. It will be delivered disassembled for compact shipping.

Insert the parts by pressing them with your fingers near the hole in the center of the left and right hanging sections. (See image)

Insert the leg parts (the longer ones go in the back).

The leg parts are designed to be a slightly loose fit.

*If you feel the fit is too loose, you can secure it with wood glue or similar adhesive for more stability.

*Pipes are not included.

■ Packaging and Shipping
We will primarily ship via [envelope]. However, it will be generously protected with cushioning material (bubble wrap) and shipped anonymously via Yu-Packet Post or similar service.