Speaker Cabinet, 12-inch Closed-Back Specification, Used DIY Item

This is a used, early-spec cabinet that was previously manufactured.
It is covered in scratches from use.

I build amplifier and speaker cabinets in my spare time from my main work as a furniture maker.
I selected SPF lumber with few knots for commercial use.
It has been modified with the addition of a plastic mesh grille, corner protectors, and casters.

Speaker: 12-inch specification
Body: SPF lumber (19mm thick)
Back panel: SPF lumber (19mm thick)
Plastic mesh grille
Baffle board: MDF (12mm thick)
Speaker mounting screws: (4-point mounting, 5x20 truss head small screws included)
Speaker mounting hole pitch: (296mm)
Wiring: Switchcraft #11 mono phone jack, insulated washer with shoulder, plastic insulated washer, jack plate, BELDEN 9497, Faston terminals, Kester 44 solder used
Handle: Genuine Marshall
With casters
With corner protectors
Paint: Oil stain (walnut color), urethane sanding sealer base coat, urethane flat finish top coat
Dimensions: W500 (W510 including corner protectors) x D260 (D262 including corner protectors) x H400 (H438 including corner protectors and casters, excluding handle)
Weight: 6.95kg

It has been meticulously crafted, resulting in a solid construction that also affects its sound.
I hope you will enjoy using this cabinet as a base, experimenting with different speakers and wiring, and searching for your preferred tone.
The wood grain is continuous as it was assembled from a single board.
The older growth rings are on the outside of the cabinet, just as they were when the tree was growing.
The main body is joined using half-blind dovetail joints.
Please judge the extent of the scratches from the photos.
Please note that no speaker is included.

Shipping will be via Yamato Transport (cash on delivery for shipping fees, drop-off discount applied).