Nine Ball Custom Lower Frame "RR" 5.11 for Hi-Capa 5.1 ①

This is a custom lower frame made by Laylax.

[Compatible Models] Tokyo Marui Gas Blowback Hi-Capa 5.1 Series (excluding D.O.R) *Please confirm with Laylax for details.
[Product Condition]
・Only checked for fit with the airsoft gun's slide; not installed.
・There is slight paint peeling and scuff marks on the safety lever mounting area. (Photo 6)
[Impressions]
I own another unit of this product and have installed and actually used it in the field. My impressions from that experience are as follows:
・During installation, the joint between the gun body and the chamber cover was tight, requiring either part to be filed down for installation.
・There is vertical play between the slide and the frame. This may be why the hammer sometimes goes to half-cock. This issue was resolved by applying tape to the hammer's slide contact point to add thickness. *This did not resolve the slide play.

*The above issues may be due to compatibility problems with the airsoft guns I own, but similar issues occurred with both my Hi-Capa 5.1 and 5.1R.

*For installation methods, please refer to Laylax's video and the instructions on the back of the box.

[Notes]
Please consider purchasing after confirming and agreeing to the following points. No claims, no returns (NC/NR).
① This condition check was performed by an amateur. There may be overlooked areas, so this is not an absolute assessment.
② Although there is no history of actual use, this is a used item. Those seeking perfection or who are sensitive should refrain from purchasing.
③ Depending on the individual differences of each gun, installation may not be possible, or modification of the main unit or this product may be necessary.
④ The symptoms described in the Impressions section may occur with the buyer's airsoft gun.
⑤ The item will be shipped using recycled packaging materials and the minimum necessary.
⑥ The product includes only the main unit and the box. Screws are not included originally.
⑦ The packaging box in Photo 1 may have the parts protruding from the plastic folded to reduce the size for shipping.