(New White) Next-Generation M4 Series Recoil Cancel FET Switch with Simple Pre-cock Function

This is an improved version of the recoil-canceling pre-cock FET for the next-generation M4 system that we previously produced.
By cutting off the power slightly after the switch cut-off, the piston remains in the retracted position, reducing the time lag for the next shot.
The unit has been completely redesigned as a + unit, and you can switch between the normal FET switch mode and the pre-cock mode by attaching or detaching the delay circuit unit.

It can be installed even with recoil remaining if used in conjunction with a crane stock.

The total length is 50 cm, and the power cord is made of Tanaka Denshi's Tanaflon F25 wire with a thickness of 16 AWG (1.25 sq).
It is a suitable size for use with general Tokyo Marui and Tokyo Marui compatible next-generation M4 and HK416 systems.
Compared to previous specifications, processing of the buffer tube is easier, and drilling holes in the tube is no longer necessary.

You can choose from the following connectors: standard mini-compatible, Deans (T-type 2P), mini Deans (mini T-type 2P), XT60, and XT30.
We primarily manufacture with mini-compatible connectors, so please inform us via private message if you wish to change.

The FET is equipped with a simple pre-cock function (spring release is also possible, of course), a protection circuit, and an SBD.
For installation, please refer to the included installation manual or the installation guide on Nekokousakuhyou's Twitter: https://twitter.com/ThreeWizard/status/1568376462507667457?s=20&t=h3myHwgMc0Xkjtnzs0wUSw
The FET is a part for advanced users.
We can provide support for installation methods, but please install and use it at your own risk.
Installation requires skills in disassembling and assembling the gun, disassembling and assembling the gearbox, and soldering.

As this is a custom-made part, please accept it on a no-claim, no-return basis.