Intel RealSense 3D Camera R200 - New, Discontinued 2015

Item
Details
Product Type
RGB, Depth (Z16) mode, etc.
Measurement Distance / Effective Range
Recommended operating range: Approx. 0.4 m to 2.8 m. Some descriptions indicate a range of approximately 0.3 m to 4.0 m depending on conditions (depends on ambient lighting and subject texture).
Connection / Interface
USB 3.0 (SuperSpeed)
Power Consumption
- Off state: Approx. 0.334 W
- Color video only: 0.75 to 0.92 W
- Depth + Infrared only: 0.99 to 1.15 W
- Color + Depth + Infrared: Approx. 1.3 to 1.6 W
Operating Environment / Temperature Range
Operating temperature: 0 to 50 ℃ (under ambient air)
Short-term storage: -40 to 70 ℃ (for transport, etc.)
Humidity (non-condensing): Max. 90 % RH (at 30 ℃)
Dimensions / Weight
Module dimensions: Length 101.56 mm × Height 9.55 mm × Width 3.8 mm
Weight: Approx. 8 g (module only)
Controllable Parameters
Gain and exposure time can be adjusted for both infrared and color cameras. Some color correction parameters (brightness, contrast, etc.) can also be partially controlled.
Calibration
Factory calibrated. The module may experience calibration drift if bent or twisted during board mounting (pay attention to chassis structure).
Other
- Built-in temperature sensor (for laser safety control)
- Supports activity LED (indicates if streaming)
- Module connector is 10-pin configuration (power, USB signals, reserve, etc.)

For more details, please check the following:

https://www.buildinsider.net/small/newsensor/realsenser200

https://docs.rs-online.com/446b/0900766b815d6e24.pdf?utm_source=chatgpt.com