2 Rails, Resin SSP Lightweight Split Slide with Muzzle Only for Gas Hi-Capa 5.1

This is a verified, usable product for advanced users who can perform basic adjustments.
Purchase is only possible for those who understand that they are responsible for the assembly results due to differences in parts, arms, or experience.
Fixed price, no negotiation. Please understand that the product may disappear without notice if sold out on other channels.

Parts for Tokyo Marui Gas Gun Hi-Capa 5.1 only, made of resin.
SSP Lightweight Split Custom Slide, Rear Sight, Front Sight, Muzzle Break

*Made of ABS resin.
*The upward-facing surface of the blowback part is not clean.
*Outer barrel is not required. There is an inner barrel retention device inside. The inner barrel assembly is done first.
*Rubber buffer is recommended. Due to increased shock from weight reduction, it is essential for recent GBB models, although not present on the 5.1.
*Slide stop notch is filled in, but can be opened with a cutter.
*Cannot be used for operation customization with strong springs, hard buffers, stacking, or power gas. Impact force beyond the original design will affect lifespan.
*Dot sights can be mounted on the 20mm rail of the front part, at a relatively low position lowered from the barrel.
*Cannot be used without the genuine external under-rail part attached to the main body.
*Cannot be used with Gold Match for the same reason, and also not with R due to the shorter inner barrel.
*Lubricants such as silicone oil, and recoil spring buffers are strongly recommended. Please check springs and other components for wear.
The rear sight is a two-point snap-fit type. Considering the fixation of the rear sight and the breech, it is recommended to prepare an M4 bolt with the same standard as the Hi-Capa 4.3.
The 5.1 does not originally have a bolt for sight fixation. The genuine rear sight has a height adjustment bolt.

*Live firing test completed. There are file marks. If you want it to be clean, you will need to do it yourself.
*Does not include the internal parts of the slide, barrel, or related metal parts.
*If the fit is tight during assembly and operation is not smooth, adjustments will be necessary. If the adjustments are insufficient and there is interference or insufficient cushioning, the product will break when fired.
*Disassembly, adjustment, and problem-solving skills are required for handling. Please use at your own risk.
*No need to bend the breech during assembly. Be careful of spring ejection. Screw fixation is essential, but do not overtighten.
There are layer patterns, defects, and sanding marks on the laminated printed product.

hi-capa