Handmade Guitar Pedal Overdrive

This is a 2-in-1 overdrive pedal made with P2P (point-to-point) wiring, featuring two circuits in series based on the EarthQuaker Devices Chrysalis and Monarch.
The connection order is Chrysalis → Monarch from right to left on the enclosure, and the order cannot be changed. However, each circuit can be used independently.
Personally, I am satisfied with the sound of each circuit, but I found that using them together at 18V yielded a good impression.
Many modifications have been made to the original circuits, so it may not be strictly called a clone or copy. This is not intended as a faithful reproduction, so please be aware of this when considering it.
The Clip switch toggles the clipping diodes in the Chrysalis-based circuit. This is a feature not present in the original circuit, but it does not drastically alter the sound. The left position is asymmetric silicon diodes, and the right position is symmetric germanium diodes.

1590XX size (approx.) 145mm x 121mm x 39.5mm
Dust caps are installed on all potentiometers to prevent dust ingress.
Please use with a DC 9V-18V center-negative power supply.
There may be scratches or uneven paint due to the manufacturing and usage process. Also, please be careful as prolonged contact with rubber materials can cause the paint film to dissolve.
True bypass specification.
Please notify us within one week if there are any critical initial defects, such as the unit not powering on.

#DIYeffector
#overdrive