SUMI Alnico Rod Pickup Set P90 Guitar Pickups

At SUMI Guitar Parts, we leverage our experience in musical instrument retail, guitar building, and repair to offer products that meet a certain quality standard.

SUMI Pickups are handmade, with each part meticulously assembled and wound over time (Made in Japan).

This is a set of P90-style neck and bridge pickups using Alnico V pole pieces (magnets), featuring a construction similar to Fender-style pickups.
*Each pickup is marked on the underside of the pole pieces to distinguish between positions (Silver = Neck, Gold = Bridge).

- The coil wire used is plain enamel (AWG42).

- The sound is voiced to have less of the typical P90 low-end boom and better high-end clarity compared to standard P90s. The output is set with a lower coil winding count, resulting in reduced power and increased sensitivity.

- Noise-canceling specification for the middle (mix) position.

- Wiring uses 2-conductor shielded wire (Gavitt).

*This listing is for the pickup units only. Pickup covers and mounting screws are not included. Please provide your own preferred covers and screws. When selecting a pickup cover, please choose a 50mm pitch. (Some manufacturers may list the pitch as 10mm, but this is equivalent to 50mm and will work without issue.)

Specifications:
Wire: Plain enamel AWG42
Winding: Neck CW (Clockwise), Bridge CCW (Counter-clockwise)
Magnet: Alnico V
Polarity: Neck North-Top, Bridge South-Top
DC Resistance: Neck approx. 6.2kΩ (±5%), Bridge approx. 7.8kΩ (±5%)
Inductance: Neck approx. 2.9H, Bridge approx. 4.2H
Wire Length: Approx. 44cm
*Resistance and inductance values are approximate. Please note that there may be slight variations due to individual differences and measurement conditions (e.g., temperature).

Shipping will be via Yu-Packet Post (mailbox delivery).

*Pickups will be tested for sound and with a tester before shipping.

#Soapbar
#ElectricGuitar
#Soapbar