Fender Roasted Maple Jazz Bass Neck (Junk)

Fender Bass Replacement Neck
Roasted Maple Jazz Bass Neck
20 Medium Jumbo Frets, 9.5 Radius, Maple, C Shape
Made in Mexico

Purchased in July 2022
Sire V7, aimoku Jazz Bass Body, Wormoth Jazz Bass Body
This neck was used with three different bodies.
I played it for a few hours a month for about two years, but then I switched to a Wormoth neck and kept this one in storage.
Fret wear is 80% or more remaining, and the truss rod is adjustable.

Reason for Junk condition: On the four Akamaru (headstock tuner holes) shown in the 10th photo, the tips of the peg screws are broken off and remain deep inside the holes.
When replacing Gotoh FB30 tuners with HipShot HB6C-1/2 Ultralite tuners, the Gotoh peg screws broke off and remain in the holes. If installing tuners that interfere with these holes, the broken screws will need to be dealt with.
If using HipShot HB6C-1/2 Ultralite tuners, they can be installed without issue.

Otherwise, it is relatively clean and in good condition.
Original box is not included.

As a bonus, I will include the neck plate:
Freedom Custom Guitar / Tone Shift Plate SP-JP-01

Specifications:
Neck: Roasted Maple
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Neck Shape: Modern C
Neck Thickness: 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
Neck Mount: 4-Bolt
Fingerboard Radius: 9.5 (241 mm)
FINGERBOARD MATERIAL: Maple
Position Inlay: Black Dot
Number of Frets: 20
Truss Rod: Standard
Truss Rod Nut: 3/16 Hex Adjustment
Made in Mexico