For Mr. A: Telecaster Body, Black Korina, Painted (All Lacquer)

Telecaster Body
Made of Black Limba (Center 2-piece)
Finished (All Lacquer)
Unused (Unassembled) but with scratches

This is a Telecaster body made of Black Limba (center 2-piece).
It has been finished and never assembled.
Due to an accident after the finishing was completed, a large ding was made on the corner of the back side of the body, so it is being sold as junk.
If you don't mind the scratches, there are no issues with usability.
Please check the scratches carefully before bidding.

Prominent scratches include:
- Ding on the back side near the strap pin (wood exposed)
- Small ding on the top side between the lower part of the control plate and the jack cup
*Please note that we have not performed a detailed inspection, so there may be scratches or dings not mentioned in the description.

The finish is all nitrocellulose lacquer, from the sealer (primer) to the color and top coat.

The clear coat was applied after the primer was finished cleanly, resulting in a finish similar to Van Zandt as is. However, if you wish to polish it, you can achieve a mirror finish by wet sanding starting from around #1200 and then polishing.
(Since it is thinly applied, it may peel off easily if wet sanding is not done carefully. Achieving a mirror finish is for advanced users.)