SANEI Washing Machine Adapter with Ultra-Fine Bubble Technology, Easy Installation, PM100-20

Simply attach between the washing machine and the hose for noticeable results with repeated washing. This washing machine adapter features a built-in, patented ultra-fine bubble generating device. It can be installed on most fully automatic washing machines. Washing with ultra-fine bubble water reduces residual dirt by 59% compared to washing with normal water, making it harder for dirt to accumulate.

Dirt Removal Comparison
Repeated Washing with Dirt Applied 10 Times (n=1)
Comparison of residual dirt when washing with UFB water versus normal water.
- Mounting Width: G3/4 (Standard screw size for domestic fully automatic washing machine water inlets)
- Material: Brass, Polyacetal, EPDM
- Usable Temperature: 60°C
- Water Pressure: 0.05MPa (dynamic pressure) to 0.75MPa (static pressure)
[Specifications]
- Model: PM100-20 (PM10020)
[Superior Cleaning Power] Generates approximately 61 million/mL of ultra-fine bubbles. These ultra-fine bubbles penetrate deep into dirt to remove it.
[Noticeable Results with Repeated Washing! A Difference in Residual Dirt.] Compared to washing with normal water, ultra-fine bubble water reduces residual dirt by 59%!
[Attaches to the Washing Machine's Water Inlet] Simply attach between the washing machine and the water supply hose! Installation requires no tools. (Be careful, as touching the screw threads with bare hands may cause injury. Always wear rubber gloves or work gloves when installing.)
[Compatible Washing Machines] Compatible with fully automatic washing machines with a screw-in type water inlet (G3/4). The screw size for fully automatic washing machine water inlets is standardized nationwide. Can be used with both top-loading and drum-type machines.
*Depending on the specifications of other manufacturers' hoses, water leakage may occur from the hose connection. Also, if your washing machine hose has a permanent bend, lateral force may be applied to the adapter, leading to water leakage. In such cases, please purchase and replace with a SANEI washing machine hose. Please also carefully check before use, as the following installation methods can cause water leakage or damage the screw threads.

1. Adapter installed at an angle to the washing machine side.
2. Hose connection installed at an angle.
3. Damaged or deformed washing machine water inlet. *We cannot provide a warranty if the washing machine becomes unusable due to damaged screw threads, etc.
*Please be aware that attempting to force installation can lead to water leakage or damage to the washing machine's screw threads. Also, please check for water leaks after installation.
*Opened during photography.