Badminton stringing tool, grommet tool, stringing tool, stringing

Stringing Tool - Grommet Threader - String Threader - Shared Hole Threader

Product: 6 x Stainless Steel Wires (Ultra-fine)
Total Length: Approx. 5 cm

Please use the following as a reference, as personal experiences may vary.

I use this when I have trouble threading the shared holes when stringing the cross strings.
Previously, I used to cut the string diagonally, pinch it with pliers, and force it through, but with this tool, I can thread it in one go, making it much easier.
If you pull the wire while it's curled as shown on the right side of the second photo, it will break immediately. However, if you set it properly and pull horizontally to the shared hole, it can be used several times.
There are 6 wires, and one wire can string 2-3 rackets, so I believe you can string over 10 rackets.
The number of uses may vary depending on the stringing method, string thickness, and tension. Please consider this as a personal opinion when stringing 0.65mm strings at around 24 lbs.