Power Rack 75x75

Pick-up is available around Iwatsuki Interchange or Saitama Stadium.
Delivery within a 30km radius is ¥3,000.
Delivery within a 40km radius is ¥4,000.

Two barbells are shown in the picture, but...
The Olympic barbell has been sold and is no longer available!

If you do not need the barbell, the price will be reduced by ¥1,000.

The width of the power rack is for reference...
It is shown for illustrative purposes only.

Barbells are generally only available for pick-up or delivery by me.

Manufacturer unknown
Power Rack
75x75
114x106x209 (approximate dimensions)
This is a very compact type for a 75x75 rack!

Rack
30mm solid steel
Safety bars
28mm solid steel
Pull-up bar
28mm solid steel
The pull-up bar is generally hollow pipe, so it is very sturdy!
The safety bars are generally 25mm, similar to IROTEC 455.

The frame is 75x75, but...
It does not have the same thickness as Rogue or MBC.
It is about the same thickness as 60x60.
Two frame covers are missing.

The last picture shows a hole that was not originally used...
The previous owner drilled a hole to try to attach something, so there is a hole.
I don't think there are any strength issues.

Shipping within Honshu is...
Approximately ¥13,000 to ¥15,000.
Even at the lowest price, it will cost over ¥12,000.

The sample barbell shown is...
180cm wide
Approximately 220cm Olympic barbell shaft.

The power rack in the picture is only loosely assembled for convenience.
When assembling, please loosely assemble first, then fully tighten the bolts.
It is currently disassembled.
The safety bars are the pull-out type, so you will need at least 1 meter of space in front of them.
I have also described this product in the comments section, so feel free to check it out if you have time.